Interesting, I didn’t know that but it seems like Wayland is indeed CSD by default. However, all relevant compositors except for Mutter support xdg-decoration (https://wayland.app/protocols/xdg-decoration-unstable-v1). So in practice it’s still only a Gnome issue.

No, that’s Gnome, not Wayland. KDE still prefers SSD on Wayland.

I feel it has gotten much better in recent years. The first time I tried KDE 5 it looked weird to me. But now I acutally quite like KDE 6. Or maybe I’ve just learned to tolerate it…

What kind of issues did/do you encounter?

The VS Code/Codium essentially provide a separate development environment within the flatpak container. All the tools there, and the shell are separate from your actual system. There are some ways to work around this (https://github.com/flathub/com.vscodium.codium/blob/master/README.md). I gave up on the Flatpak and installed a native package. Containers are nice, but they have their limitations.

Sure, Bazzite has some nice features. But, I would argue that apart from the Nvidia images (there is no AMD image) those are all minor things. And for Nvidia cards, the Mint Driver Manager is pretty good. I don’t think any of those differences play a role here.

In general, I think it’s really unhelpful to present “switch to my favorite distro” as the first step in troubleshooting an issue.

Try CachyOS or Bazzite!

Bazzite, sure, but it’s not gonna magically solve these kind of issues.

However, if one is struggling as a beginner with Linux, I would strongly advise against switching to an Arch-based distro (CachyOS). Arch is great, but this is not its target audience.

I strongly disagree with u/brucethemoose here. You wrote below that you’re currently using Linux Mint, which is a great distro for beginners. In my opinion, Bazzite offers nothing essential that is not available on Mint. IMHO, the easiest ways to play games are:

• Use Steam to play your Steam games (native or using Proton). This should just work (on both distros)
• Use Heroic Games Launcher to play games from GOG, Epic, or non-store games. The recommendation is to install the Flatpak version, which is available on both distros. Afterwards, the setup step is to install a Proton-GE version before you can play your games (https://github.com/Heroic-Games-Launcher/HeroicGamesLauncher/wiki/Linux-Quick-Start-Guide).

You can - of course - still switch to a different distro if you like, but this is not necessary or helpful to run games.

In the specs for the Laptop 13, it says:

Fingerprint Reader (2nd Gen)

Same for the 16, but not the 12.

Unfortunately, the former is not possible due to asinine requirements by the HDMI Forum: https://www.phoronix.com/news/HDMI-2.1-OSS-Rejected The only option is to use DisplayPort instead (or perhaps an adapter).

I’ve created a small helper script to help me with this:

#!/bin/bash
USED_VER=$(uname -r)
echo "Kernel version in use: $USED_VER"

echo "Other installed versions:"
dpkg --list 'linux-image*' | grep ^ii | grep -v $USED_VER

echo "Remove unneeded packages above using the following command:"
echo "sudo apt remove linux-image-VERSION"

It prints a list of the installed kernels (excl. the running one) and prints the command to uninstall the packages (it doesn’t remove anything by itself).

That sounds pretty bad and probably means other things are broken too. The easiest option would probably be a reinstall at this point, but if you want to learn something you can also try to salvage your install.

To recover, it’s probably easiest to manually configure your Ethernet connection as described by InnerScientist and then re-install the network-manager package.

You can check the status of the network-manager package using dpgk. It should look like this (ii at the start, but it sounds like it’s not installed in your case):

$ dpkg -l | grep -i network-manager
ii  network-manager                         1.52.1-1                        amd64        network management framework (daemon and userspace tools)
ii  network-manager-l10n                    1.52.1-1                        all          network management framework (translation files)

You can also check /var/log/apt/history.log to see what went wrong and if there are other things you need to fix.

I performed the upgrade in two steps apt upgrade --without-new-pkgs and apt full-upgrade (based on the release notes). I can see the following on the line Upgrade: for the command apt full-upgrade:

network-manager:amd64 (1.42.4-1+deb12u1, 1.52.1-1)

On the Remove: line you can see the packages that were removed. Unfortunately, the names of many libraries were changed in this release (e.g., libreadline8:amd64 to libreadline8t64:amd64), so there’s a lot of noise in there. Maybe you can look at that line and ignore everything that starts with lib to see if any other important packages were removed.

One thing that comes to mind is that the 50series is only supperted by the open version of the proprietary Nvidia drivers. The closed version doesn’t support your new GPU, but would work with your old GPU. Do you know which version you installed?

Plasma 6 is a significant upgrade for sure, especially on Wayland! I’d rate the crash frequency (on Fedora) at between once per week and once per month ;-)

Join the Debian Trixie upgrade fun today :) https://micronews.debian.org/

I’m running Ubuntu on a server. I’ve enabled the free Ubuntu Pro subscription to get ESM patches for the universe repository. Not sure if it really matters, but better safe than sorry.

The easiest distros to run Resolve would probably be Rocky Linux 8, Alma Linux 8 (both are based on RHEL 8). Instead of the EOL Rocky/Alma 8.6, you should use release 8.10 (8.6 would update to 8.10 anyway). However, while still currently “supported”, these are still shipping (mostly) 6-year-old (!) packages. Also, only a small number of packages is actively supported by Red Hat. IMO, this implies that these distros offer a lower level of security. The most critical parts (browser, kernel) are still well-supported, so the difference is probably not too large for most regular users. However, you may also struggle to run some other software (although Flatpaks are available). It’s unfortunate that Resolve only supports an ancient version of Rocky (Rocky 10 is now out)…

Read (only) access should be fine. What makes it complicated is if there can be writes from multiple locations. Basically, the simple version would be to just periodically copy the data from the primary to all secondary locations.

I can see why you’d want to go with an off-the-shelf NAS. But, I would carefully check if it supports your use case, as it’s quite advanced.

If the data only needs to be read & written from a single server (and the others are just backups), you can also use simpler replication instead of synchthing. E.g. syncoid or TrueNAS replication. It sounds like you should be able to do that with separate datasets per household in your usecase.

I would probably go with a simple approach like this:

• ZFS: Each house gets a “NAS” that provides a ZFS filesystem to store the data. This gives you the ability to share the drives across your use cases (you, rest of the family), snapshots, RAIDZ support, and usage quotas. For the OS, you could use what you prefer (TrueNAS, Debian, Ubuntu, …).
• Syncthing to synchronize the files across the servers/houses. This allows you to read and write data from anywhere and syncthing will mirror the writes to the other places. I use it to synchronize data across 5 devices and it works quite well.

There are probably more advanced (enterprise?) ways to handle the file synchronization. But, I think this hould be good enough for normal, personal use. The main disadvantage is that you’re only synchronizing the current data (excluding the ZFS snapshots). On the other hand, this also allows you to mix file systems if necessary.